FSU/MD SERIES

 
 
NOTE: ALL DIMS. ARE SYMMETRICAL ABOUT CENTERLINES
 

PART

NO.

SHELL

SIZE

T THR'D

UNJC-3B

A

+/-.003

B

+/- .015

C

+.015/-.000

D

E

+.000/-.030

FSU/MD-8 8 4.40 .594 .880 .570 .106/.166 .308
FSU/MD-10 10 4.40 .719 1.005 .700 .106/.166 .433
FSU/MD-12 12 4.40 .812 1.098 .820 .106/.166 .526
FSU/MD-14 14 4.40 .906 1.192 .945 .106/.166 .620
FSU/MD-16 16 4.40 .969 1.255 1.070 .106/.166 .683
FSU/MD-18 18 4.40 1.062 1.348 1.196 .106/.166 .776
FSU/MD-20 20 4.40 1.156 1.500 1.320 .106/.166 .812
FSU/MD-22 22 4.40 1.250 1.625 1.440 .106/.166 .906
FSU/MD-24 24 6.32 1.375 1.750 1.570 .123/.183 1.000
FSU/MD-25 25 6.32 1.500 1.891 1.658 .123/.183 1.125

FSU/MD-28

28

6.32

1.562

2.000

1.820

.123/.183

1.125

 
 

SPECIFICATIONS

  1. RETAINER MATERIAL - .040 +/-.003 THICK 6061-T6 ALUMINIUM ALLOY.

  2. RETAINER FINISH - ALODINE PER MIL-C-5541. PLUS TWO (2) COATS OF MMS425 PRIMER PER P.S. 13375. SHOULD PRIMER NOT BE REQUIRED, ADD "A" TO PART NUMBER, EX: FSU/MD-24A

  3. NUT, SELF-LOCKING - STEEL, CADMIUM PLATED FOLLOWED BY A SOLID DRYFILM LUBRICANT. NUTS MEET PERFORMANCE REQUIREMENTS OF MIL-N-25027 SPECIFICATION.
  • OPTIONAL CORROSION RESISTING STEEL NUTS, CADMIUM PLATED PLUS DRYFILM LUBRICANT COATING AVAILABLE.
  • WHEN ORDERING ADD "01" TO PART NUMBER. EXAMPLE: FSU/MD-801, FSU/MD-2801.
   
  Return to Index